Skip to content

Welcome to Soknockk – Premium Ventilation Solutions

Need Help? +86 19339590459

Resource · dimension reference

Confirmed Size and Color Dimension Reference Card

Use this card to compare published neck and face measurements for checked SOKNOCKK linear vent cover Size+Color listings. It is a reference aid — not an order form, stock checker, or install-certification sheet.

Version: dimensions transcribed from variation listing bullets on . Re-check the exact Size+Color page before ordering; catalog bullets can change. “Listing dimensions checked” means the numbers on this card were read from that SKU’s listing — not that inventory, purchase links, or on-site fit were re-validated today.

Quick answer

Read three different values separately: Nominal Size (catalog label such as 10×4), Neck outside dimensions (the portion that relates to the opening/duct connection), and Face outside dimensions (the visible frame). A measured opening that is numerically close to a neck figure is still not automatic proof of fit — dry-fit and installer judgment remain required.

Figures below are approximate listing statements for the named SKUs only. Do not copy a neck or face number from one SKU onto another. Official catalog status (Confirmed / Pending) is listed separately from the dimension-check status.

Browse and compare on the Modern AC Vent Cover / Linear Slot Diffuser product page. Purchase paths follow each Confirmed Size+Color listing (often Amazon); Pending statuses are not treated as ready-to-buy links here.

Checked listing dimension table

Source for each row: that variation’s _soknockk_bullets Product Dimensions line (neck / face), checked 2026-10-29. Units follow the listing (inches). “Approx.” preserves the evidence level of listing copy — these are not lab tolerances.

SKU / Size+Color Nominal Size Neck (outside, approx.) Face (outside, approx.) Dimension evidence status Official ASIN status
10×4 White
SKN-10X4-WH
10×4 (nominal catalog Size) Approx. 9.85 in L x 3.79 in W Approx. 12.2 in L x 6.1 in W Listing dimensions checked Confirmed (official ASIN catalog status)
10×4 Black
SKN-10X4-BK
10×4 (nominal catalog Size) Approx. 9.85 in L x 3.79 in W Approx. 12.2 in L x 6.1 in W Listing dimensions checked Confirmed (official ASIN catalog status)
16×4 White
SKN-16X4-WH
16×4 (nominal catalog Size) Approx. 15.82 in L x 3.79 in W Approx. 18.11 in L x 6.1 in W Listing dimensions checked Confirmed (official ASIN catalog status)
24×4 Black
SKN-24X4-BK
24×4 (nominal catalog Size) Approx. 23.62 in L x 3.79 in W Approx. 25.98 in L x 6.1 in W Listing dimensions checked Confirmed (official ASIN catalog status)
Any other Size+Color Needs verification Needs verification Needs verification Check listing
Confirmed 10x4 White linear vent cover
Confirmed 10×4 White — photo matches SKN-10X4-WH only.
Confirmed 24x4 Black linear vent cover
Confirmed 24×4 Black — photo matches SKN-24X4-BK; neck/face figures come from that SKU’s listing bullets.
Educational diagram of nominal size versus actual opening measurements
Educational diagram — nominal catalog Size versus measuring the actual opening. Not a jobsite photo or fit test.

How to read the numbers

Nominal Size is the catalog selection label. Neck relates to the duct or opening connection. Face is the visible frame. Keep length with length and width with width. Listing applications may include ceiling, wall, or floor and supply or return — those labels are not load, humidity, or certification results.

The checked product family is aluminum alloy with a powder-coated finish stated in the listing, concealed screw mounting with mounting screws described in checked listing language, and adjustable airfoil blades for direction and volume — not airtight shutoff.

Light annotation worksheet

Use these fields while comparing your opening and the exact listing. This page does not save your entries. Print from your browser when ready.

Go / no-go check before ordering

Go when… No-go when…
Opening notes and the exact Size+Color listing agree, and neck/face figures were read from that SKU. You are using another size’s photo or dimensions as a substitute.
Any uncertainty is resolved with a seller question or a re-check of the listing bullets. The opening is damaged, inaccessible, or its supply/return role is unclear.
You can dry-fit the cover and use the specified concealed-screw mounting approach. You treat numeric closeness alone as proof of fit, or assume magnets, airtight shutoff, or unlisted ratings.

For measurement method, see How to Measure Your Vent Opening. For nominal terminology, see Nominal vs. Actual Vent Size.